Skoda Octavia II 2004 Maintenance Manual page 23

At each service interval:
Work involved
– Enter the next service date on the next service sticker and affix sticker to the side of the dash panel
(driver's side), that is according to the indicator or the time and kilometre schedule (also the date for
changing the brake fluid)
– Complete and attach service mirror tag to the interior rear-view mirror (certain countries only)
– Hand customer the completed and signed form
Additional inspection work for the interval service
Every 60,000 km or 4 years
– Inspect operation of all switches, all electrical components, controls and displays
– Inspect windscreen wiper and washer system and condition of wiper blades, adjust where necessary
and top up with washer fluid
– Visual inspection of engine and parts in the engine compartment for leaks and damage
– Check the anti-freeze in the cooling system and record ...... °C, check for leaks, top up coolant if nec‐
essary
– poly V-belt - inspect condition and tension on engines without a tensioner pulley
– Gearbox, final drive and joint protection covers: visual inspection for leaks and damage
– Inspect the axle joints and joint boots for leaks and damage
– Inspect play, correct attachment and sealing boots on the track rod ends
– Inspect exhaust system for leaks, damage and attachment
– Check headlights, adjust if necessary
– Lubricate flap lock for front flap
– Perform a test drive.
Octavia II 2004 ➤ , Octavia II 2010 ➤
Maintenance - Edition 01.2018
Chapter
Chapter
⇒ "6.2 Electric consumers: check they are functioning",
page 158
⇒ "7.4 Windscreen wiper and washer system: check func‐
tioning properly", page 173
⇒ "3.3 Visual inspection of engine and parts in the engine
compartment for leaks and damage", page 50
⇒ "3.9 Inspecting antifreeze protection, replenishing cool‐
ant additive if necessary", page 63
⇒ "3.11 V-ribbed belt: check condition", page 68
⇒ "3.3 Visual inspection of engine and parts in the engine
compartment for leaks and damage", page 50
⇒ "5.5 Track rod ends: check play, fastening and sealing
flanges", page 131
⇒ "5.5 Track rod ends: check play, fastening and sealing
flanges", page 131
⇒ "6.10 Inspecting headlight beam setting and adjusting if
necessary", page 163
⇒ "9.2 Road test", page 197
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
19