Skoda Octavia II 2004 Maintenance Manual page 193

Note
Engine temperature: above an engine temperature of min. 60 °C, heat the engine to min. 80 °C by accelerating 2 to 10 times freely up to governed speed.
♦
Soot emission max. opacity value: determined in accordance with regulation ECE R24.
♦
Engine codes
Engine temperature
Recommended idling speed (rpm)
Governed speed (rpm)
Soot emission max. opacity value (1/m)
- homologation value
28)
Probe no.
Measurement mode
Measurement time slice
28) The homologation value of soot emission/opacity indicated on the type plate on the B-pillar (also indicated in the vehicle homologation documentation).
29) There are different homologation values for soot emission/opacity for engines with engine identification characters BKD. The homologation value of soot emission/opacity "0.7" is determined with the following
versions of engine control unit
♦ 03G 906 016 F
♦ 03G 906 016 HF
♦ 03G 906 016 DS
Note
Engine temperature: above an engine temperature of min. 60 °C, heat the engine to min. 80 °C by accelerating 2 to 10 times freely up to governed speed.
♦
Soot emission max. opacity value: determined in accordance with regulation ECE R24.
♦
Engine codes
Engine temperature
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
BJB BKC BKD
up to 03/2006
min. 80 °C min. 80 °C min. 80 °C
800 - 1000 800 - 1000 760 - 960
4650 - 5050 4650 - 5050 4800 - 5200
0.8 0.8 0.7
1 1
B B
0.5 s 0.5 s 0.5 s
AZV AZV
up to 03/2006 as of 03/2006
31)
min. 80 °C min. 80 °C min. 80 °C
BKD
as of 03.2006
29)
min. 80 °C
760 - 960
4600 - 5000
1.2
1 1
B B
0.5 s
BXE
Octavia II 2004 ➤ , Octavia II 2010 ➤
Maintenance - Edition 01.2018
189