Hyundai Robex 130 SMART Operator's Manual page 83

4) TOWING THE MACHINE
Tow the machine as follows when it can not move
on it's own.
Tow the machine by other machine after hook
(1)
the wire rope to the frame as shown in picture at
right.
Hook the wire rope to the frame and put a
(2)
support under each part of wire rope to prevent
damage.
Never tow the machine using only the tie
hole, because this may break.
Make sure no personnel are standing close to
the tow rope.
4-15
21074OP14A