Table of Contents
Advertisement
5)
DO NOT CONTINUE TO WORKING OVER
ONE MINUTE AT SAME POSITION OF
BOOM AND ARM
This will increase the temperature of the oil, and
cause problem in the accumulator and seals.
6)
DO NOT MOVE MACHINE OR BREAKER
WHILE STRIKING
Do not move hammer while striking.
This will cause damage to the working device and
the swing system.
7)
DO NOT WORK WHILE SWING STATE
Do not work while swing position of
superstructure.
It cause the band of track shoe, oil leakage of
roller.
8)
TAKE CARE OF CHISEL AND BOOM INTERFACE
Make sure of the arm and bucket control lever
operation.
Incorrect
Incorrect
Work
Incorrect
Incorrect
8-5
For one
minute
D11078BO06
13038OA08
Prohibitation
Prohibitation
13038OA09
D11078BO07
Advertisement
Table of Contents
