Electrical System - Hyundai Robex 130 SMART Operator's Manual

2. ELECTRICAL SYSTEM

Trouble
Lamp does not glow brightly even
when engine runs at high speed.
Lamp flickers while engine runs.
Battery charging lamp does not
go out even when engine runs at
high speed.
Unusual noise is emitted from the
alternator.
Starting motor does not turn when
starting switch is turned ON.
The pinion of the starting motor
keeps going in and out.
Starting motor turns the engine
sluggishly.
The starting motor disengages
before the engine starts up.
The engine warming up lamp
does not go ON.
The engine oil pressure lamp
does not light up when engine is
stationary(When the starting
switch is in ON position.)
Battery charging lamp does not
light up when the engine is
stationary.
(When the starting switch is in ON
position.)
Service
Check for loose terminals and open-circuit wiring.
Adjust belt tension.
Check the alternator.
Check and repair wiring.
Check the alternator.
Check and repair the wiring.
Charge the battery.
Check the starting motor.
Check the safety relay.
Charge the battery.
Check the safety relay.
Charge the battery.
Check the starting motor.
Check and repair the wiring.
Charge the battery.
Check and repair wiring.
Check the monitor.
Check the monitor.
Check the caution lamp switch.
Check the monitor.
Check and repair the wiring.
7-2
Remark