Hyundai Robex 130 SMART Operator's Manual page 59

5) S WITCH PANEL
Power mode switch
Wiper switch
Auto Deceleration switch
(1) Power mode switch
11073CD20
(2) Wiper mode switch
1107A3CD21
This switch is to select the machine power mode, which shifts
from high power work to standard power work and light power
work in a raw by pressing the switch.
H : High power work mode
S : Standard power work mode
L : Light power work mode
This switch is used to operate wiper.
Press the switch once to operate wiper.
Press the switch once more to intermittently operate
wiper low speed.
Press the switch once more to turn off wiper.
Wiper motor doesn't operate with front sliding door open.
If wiper does not operate with the start switch in the ON
position, turn the switch off immediately. Check the cause.
If the switch remains ON, it can result in motor failure.
3-8-10
Work mode switch
Travel speed switch
Buzzer stop switch
Select switch
RD8075MS11