Cluster - Hyundai Robex 130 SMART Operator's Manual

2. CLUSTER

1)
MONITOR PANEL
The monitor panel consists of gauges and lamps as shown below, to warn the operator in case of
abnormal machine operation or conditions for the appropriate operation and inspection.
Gauges : Indicate operating status of the machine.
Warning lamp : Indicate abnormality of the machine(Red).
Pilot lamp : Indicate operating status of the machine(Amber).
The monitor installed on this machine does not entirely guarantee the condition of the
machine. Daily inspection should be performed according to chapter 6, Maintenance.
When the monitor provides a warning immediately check the problem, and perform the
required action.
Auto Decel
The warming lamp lights ON and the buzzer sounds when the machine has a problem.
In this case, press the buzzer stop switch and buzzer stop, but the warming lamp lights until
the problem is cleared.
3-2
D11073CD02