Hyundai Robex 130 SMART Operator's Manual page 51

2. LCD main operation display
Default screen
Default screen
1
3
1607A3CD02A
1) Time display
1607A3CD02C
2) RPM display
1607A3CD02C
Hydraulic oil temperature gauge
3)
12th step
1st step
1607A3CD02D
4) Fuel level gauge
1st step
1607A3CD02E
5) Engine coolant temperature gauge
12th step
1st step
1607A3CD02F
Option screen
Option screen
2
1
4
4
5
3
5
1607A3CD02B
This displays the current time.
Refer to the page 3-8-6 to set time for details.
This displays the engine rpm.
This gauge indicates the temperature of hydraulic oil in 12 step
gauge.
1st step
2nd~10th step : 30-105 C(86-221 F)
11th~12th step : Above 105 C(221 F)
The gauge between 2nd and 10th steps illuminates when
operating.
Keep idling engine at low speed until the gauge between 2nd
and 10th steps illuminates, before operation of machine.
When the gauge of 11th and 12th steps illuminates, reduce the
load on the system. If the gauge stays in the 11th~12th steps,
stop the machine and check the cause of the problem.
This gauge indicates the amount of fuel in the fuel tank.
Fill the fuel when the 1st step or fuel icon blinks in red.
If the gauge illuminates the 1st step or fuel icon blinks in
red even though the machine is on the normal condition,
check the electric device as that can be caused by the poor
connection of electricity or sensor.
This gauge indicates the temperature of coolant in 12 step
gauge.
1st step
2nd~10th step : 30-105 C(86-221 F)
11th~12th step : Above 105 C(221 F)
The gauge between 2nd and 10th steps illuminates when
operating.
Keep idling engine at low speed until the gauge between 2nd
and 10th steps illuminates, before operation of machine.
When the gauge of 11th and 12th steps illuminates, turn OFF
the engine, check the radiator and engine.
3-8-2
1
Time display
2
2
RPM display
3
Hydraulic oil temperature gauge
4
Fuel level gauge
5
Engine coolant temperature gauge
: Below 30 C(86 F)
: Below 30 C(86 F)