Hyundai Robex 130 SMART Operator's Manual page 47

(11) CPU controller check warning lamp
Battery charging warning lamp
(12)
(13) Overload warning lamp
(14) Decel pilot lamp
(15) Warming up pilot lamp
(16) Preheat pilot lamp
Communication problem between CPU controller and cluster
makes the lamp blinks and the buzzer sounds.
Check if any fuse for CPU burnt off.
If not check the communication line between them.
21073CD10
This lamp blinks and the buzzer sounds when the starting
switch is ON, it is turned OFF after starting the engine.
Check the battery charging circuit when this lamp blinks during
engine operation.
21073CD13
When the machine is overload, the overload warning lamp
blinks during the overload switch is ON.
21073CD15
Operating auto decel or one touch decel makes the lamp ON.
The lamp will be ON when pushing one touch decel switch on
the LH RCV lever.
21073CD17
This lamp is turned ON when the coolant temperature is below
30 C 86 F).
The automatic warming up is cancelled when the engine
coolant temperature is above 30 C, or when 10 minutes have
passed since starting.
21073CD18
Turning the start key switch ON position starts
preheating in cold weather.
Start the engine as this lamp is OFF.
21073CD12
3-5