Hyundai Robex 130 SMART Operator's Manual page 48

2) SWITCH PANEL
Power mode switch
Wiper switch
Auto Decel
(1) Power mode switch
11073CD20
(2) Wiper mode switch
11073CD21
This switch is to select the machine power mode, which shifts
from high power work to standard power work and light power
work in a raw by pressing the switch.
H : This is used for high power work
S : This is used for standard power work
L : This is used for light power work
Refer to the page 4-7 for details.
This switch is used to operate wiper.
Press the switch once to operate wiper.
Press the switch once more to intermittently operate
wiper low speed.
Press the switch once more to turn off wiper.
Wiper motor doesn't operate with front sliding door open.
If wiper does not operate with the switch in the ON position,
turn the switch off immediately. Check the cause.
If the switch remains ON, it can result in motor failure.
3-7
Work mode switch
Travel speed switch
Buzzer stop switch
Select switch
D11073CD19A