Table of Contents
Advertisement
(1)
Monitoring display
14073CD03
(2)
Fuel gauge
White range
21073CD04
(3)
Hydraulic oil temperature gauge
Red range
21073CD05
(4)
Engine coolant temperature gauge
Red range
21073CD05
This displays the current time and machine information such as
engine rpm, coolant/hydraulic oil temperature, hydraulic oil
pressure and also error codes.
Refer to the page 4-11 for details.
This gauge indicates the amount of fuel in the fuel tank.
Fill the fuel when the white range or warning lamp
If the gauge illuminates the white range or warning lamp
blinks even though the machine is on the normal condition,
check the electric device as that can be caused by the poor
connection of electricity or sensor.
This indicates the temperature of hydraulic oil.
White range : Below 30 C(86 F)
Green range : 30-100 C(86-212 F)
Red range
: Above 102 C(215.6 F)
The green range illuminates when operating.
Keep idling engine at low speed until the green range
illuminates before operation of machine.
When the red range illuminates, reduce the load on the system.
If the gauge stays in the red range, stop the machine and
check the cause of the problem.
This indicates the temperature of coolant.
White range : Below 30 C(86 F)
Green range
: 30-100 C(86-212
Red range : Above 102 C(215.6 F)
The green range illuminates when operating.
Keep idling engine at low speed until the green range
illuminates before operation of machine.
When the red range illuminates, turn OFF the engine, check
the radiator and engine.
3-3
blinks.
Advertisement
Table of Contents
