Table of Contents
Advertisement
(3)
Lower the working equipment gently after the
location is determined.
Place rectangular timber under the bucket
cylinder to prevent the damage of it during
transportation.
Be sure to keep the travel speed switch on
the LOW(turtle mark) while loading and
unloading the machine.
Avoid using the working equipment for
loading and unloading since it will be very
dangerous.
Do not operate any other device when
loading.
Be careful on the boundary place of loading
plate or trailer as the balance of machine will
abruptly be changed on the point.
D11075TA08
5-5
Advertisement
Table of Contents
