Table of Contents
Advertisement
(3) Auto Deceleration Switch
1107A3CD22
(4)
Travel speed control switch
21073CD24
(5)
Buzzer stop switch
21073CD25
(6)
Select switch
1607A3CD25A
(7)
Work mode switch
RD8075MS12
This switch is used to actuate or cancel the auto
deceleration function. When the switch actuated and all
control levers and pedals are at neutral position, engine
speed will be lowered automatically to save fuel
consumption.
This switch is to control the travel speed which is changed
to high speed(Rabbit mark) by pressing the switch and
low speed(Turtle mark) by pressing it again.
When the starting switch is turned ON first, normally the
alarm buzzer sounds for 2 seconds during lamp check
operation. The red lamp lights ON and the buzzer sounds
when
the
machine
In this case, press this switch and buzzer stops, but the
red lamp lights until the problem is cleared.This switch is
used to enter main menu and sub menu for LCD.
This switch is to select the machine operation mode, which
shifts from general operation mode to breaker mode by
pressing the switch.
: General work mode
: Breaker operation mode
3-8-11
has
a
problem.
Advertisement
Table of Contents
