Opening/closing the housing
Opening the
housing
30
Disconnect the power source from
1
the battery charging system
NOTE!
When removing the control panel, en-
sure that the ribbon cable is not
trapped or damaged.
Undo the two TX25 screws (1) and
2
fold the control panel forwards
PDisconnect the positive lead of
3
the AccuPack (3)
Remove two TX25 screws (2)
4
Remove two TX25 screws (4) and
5
remove the cover
Remove two TX25 screws (4) and
6
remove the cover
Remove the casing
7