Thermo Scientific TRACE GC Ultra Installation Manual page 25

Configuration
1 This line appears only if the DGFC module is present. Refer to note.
2. Select
3. To change detector type, scroll to the desired detector and press ENTER to
4. When the DGFC Module is present scroll to
5. To change the make-up gas, scroll to the desired gas and press ENTER to
Installation Guide
Detector type
Makeup gas
Detector type
the slot (A, B or C) of the relevant control board. Press ENTER to display the
submenu.
confirm the selection. An asterisk appears beside the detector selected.
The gases applicable to the detector in use are displayed in the submenu. An
asterisk appears beside the currently active make-up gas is also displayed in
parentheses in the title bar.
confirm the selection. An asterisk appears beside the make-up gas selected.
LEFT DETECTOR
1
. This line indicates the type of detector mounted and
Nitrogen Phosphorus Detector
<
and press ENTER.
Makeup gas
Upgrade Kit
25