Configuring Funk Security Using Intermec Settings - Intermec CN3 Series User Manual

Chapter 3 — Configuring the Computer
80
• Microsoft security, with its Microsoft Zero Config feature, is
also available. To switch to Microsoft security, go to
"Configuring Microsoft Security" on page 96
Note: Your security choice does not depend on your
authentication server. For example, you can choose Funk security
if you use Microsoft Active Directory® to issue certificates.
If you want to use the default Funk security, you need to select a
profile. For help, see one of the following sections,
Funk Security Using Intermec Settings"
"Configuring Funk Security Using the Profile Wizard" on
page 84.
If you want to use Microsoft security, you need to select it as your
security choice. For help, see
on page 96.

Configuring Funk Security Using Intermec Settings

You can define up to four profiles for Funk security. Different
profiles let your CN3 communicate in different networks
without having to change all of your security settings. For
example, you may want to set up one profile for the
manufacturing floor and one for the warehouse. By default, the
active profile is Profile_1.
To select a profile for Funk security
1 Select Start > Settings > the Systems tab > Intermec
Settings.
2 Select Communications > 802.11 Radio > Funk Security.
3 Select Active Profile, choose a profile from the list, and save
your settings.
4 Tap the active profile to expand it.
5 (Optional) Give your profile a meaningful name:
• Select Profile Label and a text box appears.
• Select the text in the box, type a meaningful name, and
save your settings.
6 Select one profile as the active profile by tapping Active
Profile and choosing a profile fro the drop-down list.
7 Save your settings.
on this page or
"Configuring Microsoft Security"
CN3 Series Mobile Computer User's Manual
to start.
"Configuring