Intermec CN3 Series User Manual page 31

CN3 Series Mobile Computer User's Manual
Use the Windows Mobile Phone profile when you have a system
that requires network wakeup or you need the CN3 to always be
connected to the network. Although the connections are
maintained at a low power mode, this setting typically consumes
the most power. If the screen turns off, the radios continue to
maintain the network connections.
To select a power management profile
1 Tap Start > Settings > the System tab > Power Profiler.
2 From the drop-down list, select Windows Mobile Class,
Windows Mobile Standard, or Windows Mobile Phone.
3 Tap ok in the upper right corner to save your changes and
close Power Profiler.
Power Profiler also provides advanced settings that allow you to
fine-tune the power usage of the CN3. You can choose to have
the Power button turn off the screen or turn off the device. You
can also configure all of the settings in Power Profiler with
Intermec Settings.
Chapter 1 — Using the Computer
15