Launching An Application Automatically - Intermec CN3 Series User Manual

Understanding the InstallSelect Software Components
Component Name
Data Collection &
Intermec Settings
Funk Wireless Security
Printer Support
Intermec DHCP Client
Bluetooth
Avalanche Enabler

Launching An Application Automatically

CN3 Series Mobile Computer User's Manual
Chapter 4 — Developing and Installing Applications
By default, components already installed on the computer are
automatically checked to be installed again after you perform
a clean boot.
6 Tap Apply to initiate the clean boot and install only the files
that are selected.
7 Tap Yes to continue with the clean boot. The computer
performs a clean boot and restarts with all of the checked
components installed.
Description
Data collection and Intermec Settings. Also includes on-unit SDK
libraries.
If you disable this CAB file, you cannot scan or collect data on the
device and you cannot use Intermec Settings.
Intermec security supplicant that provides a wireless security
solution with several features that are not supported by Microsoft.
Provides Intermec printer driver support.
Provides the Intermec DHCP client application.
Provides the Intermec Bluetooth application support.
Enables the client to the Wavelink Device Management solution.
You will see other components available from the InstallSelect
application based on the options you selected for your CN3.
There are two ways to automatically launch your application
when you perform a reset on the computer:
• Make sure your CAB file places a shortcut to your application
in the \Windows\StartUp folder.
• Configure the AutoRun program to launch your application.
The computer contains a program called AutoRun.exe which
automates operations such as launching other processes. You can
configure AutoRun.exe through the AutoRun data file,
AutoRun.dat. For compatibility with other Intermec computers,
you can place a copy of AutoRun.exe in the same folder as your
AutoRun.dat file but it is not required.
111