Using The Gpsid Installed On The Cn3 - Intermec CN3 Series User Manual

Chapter 1 — Using the Computer

Using the GPSID Installed on the CN3

28
And, as a Microsoft software component, the GPSID also
provides these benefits:
• Allows multiple applications to simultaneously access the
GPS data stream.
• Provides access to GPS data without requiring applications to
recognize and parse NMEA syntax.
To use the GPSID installed on your CN3, you need to configure
the GPSID settings.
To configure your GPSID settings
1 Tap Start > Settings > the System tab.
2 Tap GPS. The GPS Settings screen appears.
3 On the Programs tab, select the COM port that you want
your programs to use to get GPS data from your CN3.
Note: COM1 and COM3 are reserved.
4 Tap the Hardware tab, and select these settings.
GPS hardware port:
Baud rate:
COM3
57600
CN3 Series Mobile Computer User's Manual