Intermec CN3 Series User Manual page 99

CN3 Series Mobile Computer User's Manual
If you choose TTLS or PEAP:
a Select User name and type your user name.
b Select Password prompt, and choose Enter password
now.
Note: You can use Prompt for password to troubleshoot your
connection to the network if you have problems.
c Select User Password and type a user password.
d For Validate Server Certificate, choose Enabled.
If you choose TLS:
a Load a user and root certificate on your CN3. For help,
see "Loading a Certificate" on page
b For Validate Server Certificate, choose Yes.
c You must enter a User Name and Subject Name. You can
also enter a Server Common Name if you want to
increase your level of security.
8 Exit Intermec Settings.
Configuring LEAP Security on the CN3
1 Make sure you have selected Funk as your security choice.
2 Make sure you have configured the communications and
radio parameters on your CN3.
3 From Intermec Settings, choose Communications > 802.11
Radio > Funk Security > Profile.
4 For 8021x, choose LEAP.
5 For Association, choose Open, WPA, WPA2, or Network
EAP. Encryption automatically defaults to TKIP if you
choose WPA, to AES if you choose WPA2, and to WEP if
you choose Open or Network EAP.
6 For Prompt for Credentials, choose Enter credentials now.
7 Select User name and type your user name.
8 Select User Password and type a user password.
9 Exit Intermec Settings.
Chapter 3 — Configuring the Computer
99.
83