Configuring Bluetooth Communications For Wireless Printing; Creating An Application That Lets You Print Wirelessly - Intermec CN3 Series User Manual

Chapter 3 — Configuring the Computer

Configuring Bluetooth Communications for Wireless Printing

54
3 Select the Bluetooth scanner from the DCE Device(s) list that
you want to disconnect and then tap Disconnect.
The scanner you wanted to remove no longer appears in the
list.
4 Tap Finish.
This section explains how to configure the computer for
Bluetooth wireless printing. You need to:
• make sure Bluetooth power is on. For help, see the procedure
in "Configuring Personal Area Networks" on page
• create an application that lets you print. For help, see the next
section.
• select the current wireless printer on the computer. For help,
see "Selecting the Current Wireless Printer on the
Computer" on page

Creating an Application That Lets You Print Wirelessly

The computer does not ship with an application that lets you
print wirelessly. You must create an application that opens the
wireless printing COM port on the computer. For help, see the
Bluetooth Resource Kit.
The Wireless Printing application is available from Start >
Settings > the System tab. The application separates the task of
wireless printing setup from other Bluetooth management tasks.
The Wireless Printing application uses the concept of a "current
wireless printer." The computer connects to the current wireless
printer when your application opens the wireless printing COM
port on your computer. If there is no current wireless printer
selected on your computer, there is no wireless printing COM
port registered on your computer. You must select a current
wireless printer as described in the next section.
The Wireless Printing application performs these tasks on the
computer:
• Helps you select the current wireless printer
• Stores the current wireless printer in the registry
• Registers/deregisters the wireless printing COM port
55.
CN3 Series Mobile Computer User's Manual
49.