Upgrading The Cn3 Using The Smartsystems Console - Intermec CN3 Series User Manual

Upgrading the CN3 Using the SmartSystems Console

CN3 Series Mobile Computer User's Manual
Chapter 4 — Developing and Installing Applications
When the progress is complete, the CN3 warm boots to reset
the configuration.
9 Remove the miniSD card and delete the files.
10 Set the date, time, and network communication parameters to
reestablish communications with the other devices in the
wireless network.
You can use the SmartSystems console to upgrade the operating
system on your computer. The console is part of SmartSystems
Foundation and is available from the Intermec web site via the
Intermec Developer Library (IDL). Before you can upgrade your
computer, you need:
• the SmartSystems Foundation. To download SmartSystems
Foundation, go to
Device Management page.
• the device upgrade .exe file. This file is available from the
Intermec web site at www.intermec.com. Go to Support >
Downloads. Make sure the file you select is for your
language.
To upgrade the computer using SmartSystems console
1 Install SmartSystems Foundation on your PC and open the
SmartSystems console.
2 Make sure the SmartSystems console and the computers are
on the same subnet.
3 Make sure your computers are either in a communications
dock or charging dock or that power management is disabled.
4 Download the device upgrade .exe file to your desktop PC.
5 Double-click the .exe file on your desktop PC. An
InstallShield application starts and walks you through the
process of extracting the upgrade files in the default location.
Note: Do not change the default location where InstallShield
extracts the files. The SmartSystems console requires that the files
be in this location.
www.intermec.com/idl and open the
115