Introducing The Ip4 Portable Rfid Reader; What You Get; Using The Ip4; Charging And Installing The Battery - Intermec IP4 Instructions Manual

Introducing the IP4 Portable RFID Reader

The IP4 Portable RFID Reader is an accessory handle for the
700 Series Color mobile computers. Together, the IP4 and
700 Color provide a high-performance mobile RFID solution
that allows you to bring the read/write device to the tagged
product rather than moving tagged products past a fixed reader.

What You Get

• IP4 Portable RFID Reader
• Battery (Model AB12)
• Product documentation

Using the IP4

To use the IP4, you need to perform these steps:
1 Charge and install the battery.
2 Attach your IP4 to a 700 Color.
3 (Optional) Configure your IP4 as a keyboard wedge.
4 Read an RFID tag.
These instructions describe each step.

Charging and Installing the Battery

To charge the IP4 battery, you need the Dual Pack Battery
Charger (Model AC12).
To charge the IP4 battery
• Insert the battery into a slot on the AC12 battery charger.
A fully discharged battery charges in less than 4 hours.
IP4 Portable RFID Reader Instructions 3