60: Output Protocol; 66: Output Port - Intermec EasyCoder 4630 User Manual

60: Output Protocol

Purpose: Specifies the output protocol of the interface card for
converting host commands.
Syntax: Z60,n
n =
0 IBM PPDS
1 Epson ESC/P2
2 Hewlett-Packard PCL
5 IBM Proprinter 4201/2
6 Epson LQ, 24 pint
7 Epson DFX+
8 Epson 9 pin (DFX)
9 Generic (default)
Example: &%Z60,9
Selects generic protocol.
The interface card is designed to use setting 9, generic
Notes:
protocol, when installed in the Intermec 4630 or 4830
printer. Do not change this setting.

66: Output Port

Purpose: Selects the output port.
Syntax: Z66,n
n =
0 Parallel port
1 Serial port (required setting)
2 Parallel port and initialization string
3 Serial port and initialization string
Example: &%Z66,1
Selects the serial port.
The serial port communications settings on the printer
Notes:
must match the interface card comunications settings.
2
Twinax Configuration
2-13