70: Overwrite Ebcdic (Scs/Lu1) Translation Table; Overwrite Ebcdic (Scs/Lu1) Translation Table; 71: Overwrite Dsc (Lu3) Translation Table - Intermec EasyCoder 4630 User Manual

4630 and 4830 Coax/Twinax Interface Card User's Manual
Notes: The interface card comunication settings must match
the printer serial port communication settings.

70: Overwrite EBCDIC (SCS/LU1) Translation Table

Purpose: Defines custom substitutions for the EBCDIC
(SCS/LU1) to ASCII translation table.
Syntax: Z70,x,y
x The EBCDIC character (in hex) to be
changed.
y The substitute ASCII character (in hex).
Example: &%Z70,7B,40
Prints the @ character (40 hex) when the interface card
receives the # character (EBCDIC 7B).
Notes: Previously stored substitutions are automatically
changed to the new selection when the same hex
location is specified in the EBCDIC table.
Previously stored substitutions are cancelled if an
ASCII hex sequence of 00 is specified.
Use command 99 to store the substitutions in
nonvolatile memory. They become effective the next
time the printer is turned on.

71: Overwrite DSC (LU3) Translation Table

Purpose: Defines custom substitutions for the DSC (LU3) to
ASCII translation table.
Syntax: Z71,x,y
x The DSC character (in hex) to be changed.
y The substitute ASCII character.
Example: &%Z70,7B,40
Prints the @ character (40 hex) when the interface
receives the corresponding DSC character.
Notes: This command functions like command 70, except the
substitutions are applicable to the DSC (LU3)
translation table.
1-16