24: Ibm Printer Emulation; 42: Buffer Hex Dump - Intermec EasyCoder 4630 User Manual

4630 and 4830 Coax/Twinax Interface Card User's Manual
Notes: Code Page 437 character set (often used in PC
applications) has 41 fewer characters than Code Page
850.

24: IBM Printer Emulation

Purpose: Selects the active IBM printer emulation.
Syntax: Z24,n
n =
0 5256, Model 3
1 5224, Model 1
2 5225, Model 1
3 4214, Model 2
Example: &%Z24,2
Sets the active printer emulation to 5225,
Model 1.

42: Buffer Hex Dump

Purpose: Activates Buffer Hex Dump mode. In this mode, data
received by the printer is printed as ASCII control
characters and in hexadecimal notation. This mode
stays active until the interface card receives the stop
command or the printer is turned off.
Syntax: Z42,n
n =
0 No action taken (default)
1 Start buffer hex dump
2 Stop buffer hex dump
Example: &%Z42,1
Starts buffer hex dump printing.
&%Z42,2
Stops buffer hex dump printing.
Notes: The printer must be in Data Line Print mode.
Printing starts with the buffer after the start command
has been received by the printer and stops with the
buffer after the stop command has been received.
2-12