34: Intervention Required (Ir) Timeout; 39: Ending Delimiter Characters - Intermec EasyCoder 4630 User Manual

4630 and 4830 Coax/Twinax Interface Card User's Manual
Notes: This command, along with command 99, changes the
default LU1 language setting in the permanent
memory of the interface.
The command value should match the language
number used in IBM CU configuration sequence
number 121.

34: Intervention Required (IR) Timeout

Purpose: Sets the time interval between a printer error and
sending an IR signal to the host.
Syntax: Z34,n
n =
000
001 to 255
120
Example: &%Z34,036
Sets IR time interval to 3 minutes
(5 seconds. x 36 = 180 seconds = 3 minutes)

39: Ending Delimiter Characters

Purpose: Specifies one or two characters to be used as the
ending delimiter for Command Pass-Thru (CPT).
Syntax: Z39,xy
x The ASCII hexadecimal value of the first
delimiter character.
y The ASCII hexadecimal value of the
second delimiter character.
Example: &%Z39,253F
Specifies %? as the alternate ending delimiter
characters (% is 25 hex and ? is 3F hex).
1-10
Never send IR
Send IR after n times 5 seconds
Send IR after ten minutes (default)