Before You Begin; Safety Summary - Intermec EasyCoder PC4 Installation Instructions Manual

Before You Begin

Before You Begin
Th is section provides you with safety information, technical support
information, and sources for additional product information.

Safety Summary

Your safety is extremely important. Read and follow all warnings and
cautions in this document before handling and operating Intermec
equipment. You can be seriously injured, and equipment and data can be
damaged if you do not follow the safety warnings and cautions.
Do not repair or adjust alone
Do not repair or adjust energized equipment alone under any circum-
stances. Someone capable of providing fi rst aid must always be present
for your safety.
First aid
Always obtain fi rst aid or medical attention immediately after an injury.
Never neglect an injury, no matter how slight it seems.
Resuscitation
Begin resuscitation immediately if someone is injured and stops breath-
ing. Any delay could result in death. To work on or near high voltage,
you should be familiar with approved industrial fi rst aid methods.
Energized equipment
Never work on energized equipment unless authorized by a responsible
authority. Energized electrical equipment is dangerous. Electrical shock
from energized equipment can cause death. If you must perform autho-
rized emergency work on energized equipment, be sure that you comply
strictly with approved safety regulations.
Battery pack disposal
Th e battery pack contains nickel/metal hydride (NiMH) cells which are
potentially dangerous to the environment. Check and follow local regula-
tions for disposal of nickel/metal hydride batteries. Do not disassemble
the battery pack and only recharge it with approved equipment from
Intermec.
iv EasyCoder PC4/PC41 Mobile Battery Unit Installation Instructions