Installing Applications Using The Ftp Server; Installing Applications Using Wavelink Avalanche - Intermec CK3a1 User Manual

Chapter 3 — Developing and Installing Applications
5 On your CK3, navigate to the storage card folder and run your

Installing Applications Using the FTP Server

The CK3 has a built-in FTP Server that connects to a network through
Ethernet, 802.11a/b/g, or Bluetooth communications. You can use
the server to transfer your application file to the computer. Another
benefit of using the FTP server is that you can create FTP scripts to
automate the process of copying your files to the computer. This
option is useful when you need to send files to a large number of
computers.
The easiest way to manage the FTP server is to enable the FTP menu
within iConnect.
To enable the FTP menu
•
HKEY_CURRENT_USER\Software\iConnect2\IConnect\Settings\ShowFTPMenu
The iFTP menu is available the next time your start iConnect.
To manage the state of the FTP server
•
HKEY_CURRENT_USER\Software\iConnect2\IConnect\Settings\FtpAutoStart
HKEY_CURRENT_USER\Software\iConnect2\IConnect\Settings\FtpHeartbeat

Installing Applications Using Wavelink Avalanche

You can use the Wavelink Avalanche device management system to
install applications on all of your wireless CK3 computers. To use
Wavelink Avalanche, you need to install the Avalanche Enabler on
your CK3.
To install the Avalanche Enabler on your CK3
1 Tap Start > File Explorer > Windows > InstallSelect. The
2 Make sure that Avalanche Enabler is selected.
3 Tap Apply. You CK3 clean boots and Avalanche Enabler is
56
application.
Create this DWORD registry key and set it to a value of 1:
Modify these existing registry keys:
Where 1 = enable and 0 = disable.
InstallSelect utility starts.
installed.
CK3 Mobile Computer User's Manual