To Exit Emulation Mode And Return To Dos; 5055 Data Collection Pc - Intermec Trakker Antares 2415 Programmer's Manual

To Exit Emulation Mode and Return to DOS

5055 Data Collection PC

Native Terminal Emulation Programmer's Guide
Do a cold-restart to exit the current emulation program and return back to
the DOS keyboard layout. Press [Y], press [Enter] several times to put you
at the DOS C:\ prompt. To exit to the beginning of the current emula-
tion, press and hold [Blue] and [Yellow], and both [ENT] keys to do the
hard reset.
If you are running terminal emulations and ever update the DOS load
on the internal SanDisk IDE drive on the 5055 PC, be aware that
when updating 50DS1000, avoid copying the CONFIG.SYS and
AUTOEXEC.BAT files. The new versions of these two files may
interfere with existing applications, such as Terminal Emulations. If
affected, Terminal Emulations will automatically run on boot up.
In all other situations, do copy the CONFIG.SYS and
AUTOEXEC.BAT files.
This contains information about the terminal emulations with keyboards
supported for the Intermec
The 5055 PC supports terminal emulations with rugged keyboards.
FWP650H0 is DOS-based and is not compatible with Windows DOS
prompts.
An external PS/2-compatible keyboard is required for configuring and us-
ing terminal emulations.
Terminal emulation font files are needed to generate the various character
fonts. See the related terminal emulation programmer's reference guide for
additional information.
—
Chapter 3 Using the Terminal Emulation Menus
R
5055 Data Collection PC.
101