HMS Networks Ixxat CAN-Gateway Configurator V6 User Manual page 14

CAN-Gateway Configurator V6 for CAN@net NT and CANbridge NT
9. In combo box Target Device (7) select the device in use.
or
If a CAN@net NT is connected via a router, enter the IP address in combo box Target Device (7)
10. Click button Connect (8) to connect the selected device.
If using the CAN@net NT:
a. For ASCII Gateway, VCI Interface, and ECI Interface mode make sure, that the IP address is in the range
of the network in which the device integrated.
b. For CAN-Ethernet-CAN bridge make sure, that the IP addresses of all devices of the bridge are in the
same IP range.
c. For more information see User Manual
Name.
11. To create a new project file, click button New (5).
or
To change the current configuration, click button Read from (9) and save the configuration.
12. Configure the device in the selected mode (see
Page 10 of 56
CAN@net NT 100/200/420, Changing IP Address and Device
Configuring the Device, p.
Connecting the Device in Use
11).
4.02.0332.20001 Version 1.7