HMS Networks Ixxat CAN-Gateway Configurator V6 User Manual page 53

Output when Started Without Parameters
• CXML: device configuration created and saved by the CAN-Gateway Configurator (*.cxml)
• CONF: device configuration exported by the CAN-Gateway Configurator as conf file
• ERR: error/log file
• IPC: file for the IP configuration (can be read from the device, changed and written back to the device)
• HFU: HMS firmware update file to update the firmware (available on product support pages on
www.ixxat.com/support-bridges-gateways)
Descriptions of possible options:
• init: restarting the device and activating the loaded configuration (option for Lua scripts)
• terminal: after writing the configuration the program changes to terminal mode and displays all terminal
outputs from the device on the screen (option for Lua scripts). Can be cancelled with any key.
• s<serial-no>: if the IP address of the device is unknown or if several devices are addressed with "any", it is
possible to address exactly one device with the serial number.
4.02.0332.20001 Version 1.7
CAN-Gateway Configurator V6 for CAN@net NT and CANbridge NT
Page 49 of 56