Table of Contents
Advertisement
CAN-Gateway Configurator V6 for CAN@net NT and CANbridge NT
Action Rules
It is possible to configure either a delay time or a blocking time.
The blocking time defines the minimum time between two executed actions. The blocking time starts after the
execution of an action. During the defined time span no action is executed. When the blocking time is expired,
the data of the last received event during the blocking time is used for the action. Other events that occur during
the blocking time are discarded.
The delay time defines the time span between the reception of an event and the execution of the action. When
the delay time is expired the action is executed. All subsequently events that occur during the delay time are
discarded.
Page 28 of 56
4.02.0332.20001 Version 1.7
Advertisement
Table of Contents
Related Manuals for HMS Networks Ixxat CAN-Gateway Configurator V6
Related Products for HMS Networks Ixxat CAN-Gateway Configurator V6
- HMS Networks Airconwithme
- HMS Networks Anybus Communicator
- HMS Networks Anybus Communicator ABC3028
- HMS Networks Anybus Communicator ABC3028-A
- HMS Networks Anybus Communicator ABC3261-A
- HMS Networks Anybus Communicator ABC4021
- HMS Networks Anybus Communicator ABC4023
- HMS Networks Anybus CompactCom 40 POWERLINK
- HMS Networks Anybus Defender Compact
- HMS Networks Anybus North ABC3213-A
- HMS Networks Anybus Terminator T1
- HMS Networks Anybus Wireless Bolt II
- HMS Networks Anybus Wireless Bolt LTE
- HMS Networks Anybus Wireless Bolt LTE AWB1502-B
- HMS Networks Anybus Wireless Bolt LTE AWB1503-B
- HMS Networks Anybus Wireless Bolt LTE AWB1504
Need help?
Do you have a question about the Ixxat CAN-Gateway Configurator V6 and is the answer not in the manual?
Questions and answers