Table of Contents
Advertisement
6.3.4 Restoring factory settings on a MATRIQ instrument
The Cohesion Operator can restore MATRIQ instruments that currently use firmware package
version 2.08.24 or greater. To restore MATRIQ instruments that use older software packages,
refer to the user manual that came with your instrument.
To restore factory settings:
1.
Open the Cohesion Operator, for example by double-clicking the Cohesion Operator desktop
icon.
2.
Select the instrument by entering its IP address or by selecting it from the Discovery drop down
list.
3.
(optional) Retrieve instrument information, including current firmware versions, by clicking
Connect.
4.
Click Restore.
IP address settings will also revert to factory settings.
Quantifi Photonics Ltd.
Version
2.04
Bit Error Rate Tester | BERT 1005
27
Advertisement
Table of Contents
