Quantifi Photonics BERT 1005 Series User Manual page 68

Description Set the current ED frequency to an arbitrary value within the valid operating range.
Parameters value: The desired new value
MIN: Set to the minimum value
MAX: Set to the maximum value
DEF: Restores the default value
Response No response
Example :SENS3:CLOC:FREQ:ARB 7.96
Command :SENSe<n>:CLOCk:FREQuency:STanDard?
Syntax :SENSe<n>:CLOCk:FREQuency:STanDard?[<wsp><MIN|MAX|DEF|SET|LIST|ALL|ST
EP|UNIT>]
Description Query the current ED frequency standard settings.
Parameters MIN: Query the minimum configurable value
MAX: Query the maximum configurable value
DEF: Query the default power-on value
SET: Query the current SET value
LIST: Query the LIST of discrete options for configurable values (if available)
ALL: Query the values specified by MIN, MAX, DEF, SET, and LIST
STEP: Query the minimum resolution of the frequency value
UNIT: Query the default unit for the frequency value
By default, the command Query the current SET value.
Response A single value or a comma separated string of values. For ALL, the format of the
response is "<MIN>,<MAX>,<DEF>,<SET>,<LIST>".
If the frequency is set to an arbitrary value, the SET value in the response is NAN.
Example STANDARD MODE:
:SENS3:CLOC:FREQ:STD?
-> 14.5
ARBITRARY MODE:
:SENS3:CLOC:FREQ:STD?
-> NAN
Command :SENSe<n>:CLOCk:FREQuency:STanDard
:SENSe<n>:CLOCk:FREQuency:STanDard<wsp><value|MIN|MAX|DEF>
Syntax
Description Set the current ED frequency to a standard value.
Parameters value: The desired new value
MIN: Set to the minimum value
MAX: Set to the maximum value
DEF: Restores the default value
Response No response
Example :SENS3:CLOC:FREQ:STD 14.5
:SENSe<n>:MEASure<m>:BATHtub:STARt
Command
:SENSe<n>:MEASure<m>:BATHtub:STARt
Syntax
Description Starts the bathtub measurement
Parameters No parameters
Response No response
Example :SENSe3:MEASure2:BATHtub:STARt
Command :SENSe<n>:MEASure<m>:BATHtub:STOP
Syntax :SENSe<n>:MEASure<m>:BATHtub:STOP
Description Stops the bathtub measurement
Parameters No parameters
Response No response
Example :SENSe3:MEASure2:BATHtub:STOP
Command :SENSe<n>:MEASure<m>:BATHtub:MINErrors?
Quantifi Photonics Ltd. Version 2.04
Bit Error Rate Tester | BERT 1005
68