Quantifi Photonics BERT 1005 Series User Manual page 73

Syntax :SENSe<n>:MEASure<m>:EDIagram:HORIzontal<wsp><value|MIN|MAX|DEF>
Description Set the horizontal (x) resolution step size of the eye measurement.
Parameters value: The desired new set point
MIN: Set to the minimum value
MAX: Set to the maximum value
DEF: Restores the default value
Response No response
Example :SENSe3:MEASure2:EDIagram:HORIzontalstep 4
Command :SENSe<n>:MEASure<m>:EDIagram:PatternLENgth?
Syntax :SENSe<n>:MEASure<m>:EDIagram:PatternLENgth?[<wsp><MIN|MAX|DEF|SET|
LIST|ALL|LINKED>]
Description Query the eye measurement pattern length (2^n bits) resolution.
Parameters MIN: Query the minimum configurable value
MAX: Query the maximum configurable value
DEF: Query the default power-on value
SET: Query the current SET value
LIST: Query the list of discrete options for configurable values (if available)
ALL: Query the values specified by MIN, MAX, DEF, SET, and LIST
LINKED: Query the linked channels
By default, the command Query the current SET value.
Response A single value, or a comma separated array. When ALL is requested, the format is
"<MIN>,<MAX>,<DEF>,<SET>,<LIST>".
Example :SENSe3:MEASure2:EDIagram:PatternLENgth? MAX -> 16
Command :SENSe<n>:MEASure<m>:EDIagram:PatternLENgth
Syntax :SENSe<n>:MEASure<m>:EDIagram:PatternLENgth<wsp><value|MIN|MAX|DEF>
Description Set the eye measurement pattern length (2^n bits) resolution.
Parameters value: The desired new set point
MIN: Set to the minimum value
MAX: Set to the maximum value
DEF: Restores the default value
Response No response
Example :SENSe3:MEASure2:EDIagram:PatternLENgth 16
Command :SENSe<n>:MEASure<m>:EDIagram:STARt
Syntax :SENSe<n>:MEASure<m>:EDIagram:STARt
Description Starts the eye scan measurement. This command must always be used in conjunction
with the :CALCulate<n>:DATA<m>:EDIagram:STATus? query to ensure that the ED
measurements are not running.
Parameters No parameters
Response No response
:SENSe3:MEASure2:EDIagram:STARt
Example
Command :SENSe<n>:MEASure<m>:EDIagram:STOP
Syntax :SENSe<n>:MEASure<m>:EDIagram:STOP
Description Stops a running eye scan measurement.
Parameters No parameters
Response No response
Example :SENSe<n>:MEASure2:EDIagram:STOP
Command :SENSe<n>:MEASure<m>:EDIagram:VERTical?
Quantifi Photonics Ltd. Version 2.04
Bit Error Rate Tester | BERT 1005
73