Quantifi Photonics BERT 1005 Series User Manual page 75

Syntax :SENSe<n>:PATTern<m>:EQBoost:MODE?[<wsp><DEF|SET|INFO>]
Description Query the ED equalizer boost mode.
Parameters DEF: Query the default power-on value
SET: Query the current SET value
INFO: Provides a description of what the return values represent
By default, this command Query the current SET value.
Response An integer indicating the ED equalizer boost mode.
Example :SENSe3:PATTern2:EQBoost:MODE? -> 0
Command :SENSe<n>:PATTern<m>:EQBoost:MODE
Syntax :SENSe<n>:PATTern<m>:EQBoost:MODE<wsp><value|DEF>
Description Set the ED equilizer boost mode.
Parameters value: The desired boost mode
DEF: Restores the default value
Response No response
Example :SENSe3:PATTern2:EQBoost:MODE 0
:SENSe<n>:PATTern<m>:LOGic?
Command
Syntax :SENSe<n>:PATTern<m>:LOGic?[<wsp><DEF|SET|INFO >]
Description Query the ED pattern digital level logic.
Parameters DEF: Query the default power-on value
SET: Query the current SET value
INFO: Provides a description of what the return values represent
By default, the command Query the current SET value.
Response An integer indicating the current set digital level logic.
Example :SENSe5:PATTern1:LOGic? INFO -> 0:LOW,NEGATIVE 1:HIGH,POSITIVE
Command :SENSe<n>:PATTern<m>:LOGic
Syntax :SENSe<n>:PATTern<m>:LOGic<wsp><0|NEGative|LOW|1|POSitive|HIGH|DEF>
Description Set the ED pattern digital level logic.
Parameters NEGative|LOW: Set to the positive logic
POSitive|HIGH: Set to the negative logic
DEF: Restores the default value
Response No response
Example :SENSe3:PATTern2:LOGic NEG
Command :SENSe<n>:PATTern<m>:TYPE?
Syntax :SENSe<n>:PATTern<m>:TYPE?<wsp><DEF|SET|LIST|ALL|INFO|LINKED>
Description Query the ED pattern type
Parameters DEF: Query the default power-on value
SET: Query the current SET value
LIST: Query the list of discrete options for configurable values
ALL: Query the values specified by DEF, SET, and LIST
INFO: Provides a description of what the return values represent
LINKED: Query the linked channels
By default, the command Query the current SET value.
Response A single integer value, or a comma separated integer array. When ALL is requested,
the format is "<DEF>,<SET>,<LIST>".
Example :SENSe3:PATTern2:TYPE? LIST -> 0,1,2,3,4,5,6
Command :SENSe<n>:PATTern<m>:TYPE
Quantifi Photonics Ltd. Version 2.04
Bit Error Rate Tester | BERT 1005
75