Quantifi Photonics BERT 1005 Series User Manual page 20

5. At the end of the installation, it is recommended to select the Reboot now option, and click Finish to
complete the installation process.
6. Windows Security Alert may prompt the user for network access. It is recommended that both
options be ticked, to allow any network configuration.
7. After rebooting the system, on startup a User Account Control prompt will be displayed to run the
Cohesion Firmware Updater Utility. Click Yes and proceed with the application.
Quantifi Photonics Ltd. Version 2.04
Bit Error Rate Tester | BERT 1005
20