Check Channels Status - Quantifi Photonics BERT 1005 Series User Manual

Check channels status

The operation status of each channel is displayed in the channel status panel.
The indicators are used to show the operational state of each channel as follows:
• PPG ENABLE (Pattern generation):
Green – Indicates that the pattern generation is enabled.
o
Gray - Indicates that the pattern generation is disabled.
o
• ED BER (Error detection):
BER value displayed – Indicates that the error detection is running.
o
BER value hidden - Indicates that the error detection is stopped.
o
•
ED LOCK (Error detection PLL lock):
Green – Indicates that the PLL lock for error detection is enabled.
o
Gray– Indicates that the PLL lock for error detection is disabled.
o
Orange– Indicates that the PLL lock is being changed.
o
A general status indicator is displayed to the left of the product model number. A green indicator
represents that the product is ready to operate, and an orange indicator represents that it is busy.
Quantifi Photonics Ltd. Version 2.04
Bit Error Rate Tester | BERT 1005
43