Manage Cohesionui Settings - Quantifi Photonics SLED 1000 Series User Manual

7.4 Manage CohesionUI settings
On the SETTINGS page you can configure CohesionUI settings and unit preferences.
NOTE
CohesionUI reverts to default settings when power-cycling the chassis.
To view all settings and unit preferences and adjust as required:
1. Click SETTINGS.
2. Change settings or unit preferences as required, for example temperature units.
Please note that the units displayed on this page are not always relevant for each product.
3. Step size refers to the amount by which a value is increased or decreased when clicking the + or - button.
Quantifi Photonics | SLED 1000 / 1300 Series PXIe User Manual | Document version 1.08
25 / 61