Status Leds - Quantifi Photonics BERT 1005 Series User Manual

Status LEDs

The status LEDs are used to show the operation state of the BERT 1005 product.
When the system is powered on, the LEDs are turned sequentially in green and then red. Afterwards, the
color changes to orange, to show the initialization state of the system, and then the LEDs are turned off.
For each channel of the pulse pattern generator (PPG):
•
Green – Pattern generation is running.
•
Off – The module is powered off or no pattern generation is running.
For each channel of the error detector (ED):
• Green – Error detection is running.
• Orange – Eye scan is running.
•
Off – The module is powered off or no error detection or eye scan is running.
Quantifi Photonics Ltd. Version 2.04
Bit Error Rate Tester | BERT 1005
11