Table of Contents
Advertisement
7.4.1
Set and Actual values
Some Quantifi Photonics products will allow the user to set a given parameter's value and then read
that parameter (eg. Laser, VOA, O2E, etc). In order to help the user to distinguish between a set value
and an actual read value, CohesionUI will format these values differently according to the legend in the
top right corner of the window.
•
ACTUAL
: the actual value of the parameter, defined by querying the module
•
SET: the intended value of a given parameter, defined by user input
In the following example, the POWER is
user can see both the current and user defined value of a given parameter.
The
SET
and
ACTUAL
values are only displayed for appropriate parameters which require user input.
For parameters that report a value and do not depend on user input, only an
Settings page
The SETTINGS page is used to configure the CohesionUI settings and unit preferences or to synchronize
/ reinitialize the system. These controls can be accessed by clicking the SETTINGS button.
Quantifi Photonics Ltd.
SET
to
10.00
dBm, but the
Version
2.04
Bit Error Rate Tester | BERT 1005
ACTUAL
value is
-16.02 dBm
ACTUAL
value is displayed.
. Thus, the
31
Advertisement
Table of Contents
