Quantifi Photonics BERT 1005 Series User Manual page 71

Syntax :SENSe<n>:MEASure<m>:EALarm:POINt<wsp><value|0|AUTO|1|MANUAL|DEF>
Description Set the mode of the ED point measurement.
Parameters value: The desired new set point
0: Set the point mode to automatic
AUTO: Set the point mode to automatic
1: Set the point mode to manual
MANUAL: Set the point mode to manual
DEF: Restores the default value
Response No response
Example :SENSe15:MEASure1:EALarm:POINt MANUAL
Command :SENSe<n>:MEASure<m>:EALarm:VOLTage?
Syntax :SENSe<n>:MEASure<m>:EALarm:VOLTage?[<wsp><MIN|MAX|DEF|SET|ALL|STEP|
UNIT|LINKED>]
Description Query the voltage of the ED point measurement
Parameters MIN: Query the minimum ED point voltage
MAX: Query the maximum ED point voltage
DEF: Query the default ED point voltage
SET: Query the set ED point voltage
ALL: Query a comma separated string in the format [MIN,MAX,DEF,SET]
STEP: Query the minimum step between ED point voltages
UNIT: Query the unit of the ED point voltage
LINKED: Query the linked channels
Response A single integer value, or a list of comma separated values.
Example :SENSe3:MEASure2:EALarm:VOLTage? ->0.000000
:SENSe3:MEASure2:EALarm:VOLTage? ALL ->
-217.000000,217.000000,0.000000,0.000000
:SENSe3:MEASure2:EALarm:VOLTage? STEP ->7.000000
:SENSe3:MEASure2:EALarm:VOLTage? UNIT ->mV
:SENSe3:MEASure2:EALarm:VOLTage? LINKED ->1
Command :SENSe<n>:MEASure<m>:EALarm:VOLTage
Syntax :SENSe<n>:MEASure<m>:EALarm:MODE<wsp><value|DEF>
Description Set the ED point voltage
Parameters value: The desired new set point
DEF: Restores the default value
Response No response
Example :SENSe3:MEASure2:EALarm:VOLTage 7
Command :SENSe<n>:MEASure<m>:EALarm:PHASe?
Syntax :SENSe<n>:MEASure<m>:EALarm:PHASe?<wsp><MIN|MAX|DEF|SET|ALL|STEP|UNIT
LINKED>
Description Query the phase of the ED point measurement.
Parameters MIN: Query the minimum ED point phase
MAX: Query the maximum ED point phase
DEF: Query the default ED point phase
SET: Query the set ED point phase
ALL: Query a comma separated string in the format [MIN,MAX,DEF,SET]
STEP: Query the minimum step between ED point phases
UNIT: Query the unit of the ED point phase
LINKED: Query the linked channels
Response A single value, or a comma separated array. When ALL is requested, the format is
"<MIN>,<MAX>,<DEF>,<SET>".
Example :SENSe3:MEASure2:EALarm:PHASe? ->0.000000
:SENSe3:MEASure2:EALarm:PHASe? ALL ->
-2.468750,2.468750,0.000000,0.000000
:SENSe3:MEASure2:EALarm:PHASe? STEP ->0.015625
:SENSe3:MEASure2:EALarm:PHASe? UNIT ->UI
:SENSe3:MEASure2:EALarm:PHASe? LINKED ->1
Command :SENSe<n>:MEASure<m>:EALarm:PHASe
Quantifi Photonics Ltd. Version 2.04
Bit Error Rate Tester | BERT 1005
71