Cohesion Firmware Updater Utility - Quantifi Photonics BERT 1005 Series User Manual

Bit Error Rate Tester | BERT 1005
6.2.2

Cohesion Firmware Updater utility

The Cohesion Firmware Updater utility serves as a single window summary application to display the
current firmware status of all the Quantifi Photonics PXIe modules installed in the chassis.
The Cohesion Firmware Updater utility can be accessed via the Cohesion Manager application (see
Section for more 6.2.1 information).
Whenever a new version of the CohesionInstaller is installed on the system, the Cohesion Firmware
Updater utility will automatically launch after the system is rebooted. It will show the user the firmware
status of all installed Quantifi Photonics modules and allow the user to update the firmware to a new
version if applicable.
If a module's firmware is out of date, it is highly recommended to update the firmware to the new
available version. Clicking the Automatic button will update the module(s) to the latest supported
firmware for the installed packages on the system.
Quantifi Photonics Ltd. Version 2.04 22