Quantifi Photonics BERT 1005 Series User Manual page 19

2. Follow the on-screen installation prompts.
3. Continue with the installation by following the on-screen installation prompts. Choose the default
installation type – CohesionUI with Apache.
4. Installation will continue with the Chassis Mode selection. The default setting is Single Chassis Mode.
If unsure, proceed with the default mode setting.
To operate in Multiple Chassis Mode, additional hardware modules are required. The Chassis
Mode can be changed at any time, so it is recommended to select Single Mode until all other
configuration requirements have been met.
Quantifi Photonics Ltd. Version 2.04
Bit Error Rate Tester | BERT 1005
19