Bert 1005 Matriq Instrument Installation - Quantifi Photonics BERT 1005 Series User Manual

BERT 1005 MATRIQ instrument installation

STEP 1:
Insert power cord
STEP 3:
via Ethernet – Connect Ethernet cable
•
You must use the external power supply that has been supplied by Quantifi Photonics
with the unit. Any attempt to use a different external power supply may cause product
damage and will void your warranty.
•
The external power supply that has been used with the unit can only be used with that
unit. Do not use it with any other product.
Quantifi Photonics Ltd.
STEP 2:
Power ON the instrument
STEP 4:
IP address will appear on the LCD screen
via USB
Version 2.04
Bit Error Rate Tester | BERT 1005
STEP 3:
via USB – Connect USB cable
via Ethernet
17