Installing Software For Matriq Instruments; Installing Cohesion Operator On Client Computer(S) - Quantifi Photonics BERT 1005 Series User Manual

After clicking OK, the firmware update progress will be shown in the Update Status column.
The File button is reserved for updating a module to a specific firmware version if required.

Installing software for MATRIQ instruments

6.3.1

Installing Cohesion Operator on client computer(s)

Set up any computer you use to connect with the instrument by installing the latest Cohesion Operator
software package. Cohesion Operator enables you to connect with Quantifi Photonics instruments on
your network and manage firmware upgrades.
The package is included on the USB media device that we provide with your instrument, or you can
download it from quantifiphotonics.com (go to Resources > Drivers, software and manuals > MATRIQ
Series).
If another MATRIQ instrument is already connected to the client computer over USB, consult
the Network and Update settings (7.5.4) section below on configuring the Ethernet / USB IP
address for multi-instrument control.
To install the software package on a client computer:
•
(recommended) Save your work and close all programs.
• If using the USB media device, insert it on the computer.
• Double-click CohesionOperator-<version>.exe and follow the prompts.
NOTE: A Windows Security Alert may prompt you to allow network access. We recommend that
you allow access to both, private and public networks, to enable any network configuration.
Quantifi Photonics Ltd. Version 2.04
Bit Error Rate Tester | BERT 1005
23