2
Features and Functions
Carrier Frequency
78
Remote Interface Operation
FUNCtion {SINusoid|SQUare|RAMP|USER}
You can also use the APPLy command to select the function,
frequency, amplitude, and offset.
The maximum carrier frequency depends on the function
selected as shown below. The default is 1 kHz for all functions.
Table 2-9 Carrier frequency for ASK
Function
Sine
Square
Ramp, Triangle
Arbitrary
Only Square wave with a 50% duty cycle is available for the
Internal ASK modulating waveform.
Soft Front Panel Operation
On the Frequency panel as shown in
desired frequency value and select the unit from the drop
down list.
Remote Interface Operation
FREQuency <frequency>
You can also use the APPLy command to select the function,
frequency, amplitude, and offset.
Minimum frequency
1 μHz
1 μHz
1 μHz
1 μHz
Figure 2-
Maximum frequency
20 MHz
20 MHz
200 kHz
200 kHz
3, input the
U2761A User's Guide