2
Features and Functions
Carrier Waveform
56
Soft Front Panel Operation
Click Mod
and then select FM
Figure 2-
18. To output the FM waveform, configure the
settings for the carrier frequency, output amplitude, offset
voltage, modulating frequency, deviation, and the desired
waveform.
Figure 2-18 Panel view of FM
Remote Interface Operation
FM:STATe {0|OFF|1|ON}
The FM carrier waveform consists of Sine, Square, Ramp,
Triangle, or Arbitrary waveform. The default waveform is
Sine wave. You cannot use Pulse or DC as the carrier
waveform.
Soft Front Panel Operation
For Arbitrary waveforms, select Arb
as shown in
Figure 2- 2
from the drop down list
Figure 2-
16.
as shown in
and select the desired waveform
as shown in
U2761A User's Guide
at the top panel