2
Features and Functions
Set Output Using SCPI Commands
42
Remote Interface Operation
OUTPut {0|OFF|1|ON}
The APPLy command overrides the current setting and
automatically enables the output control.
The following SCPI commands show a sample procedure of
generating output.
Example 1, To output a DC voltage
-> *CLS; *RST
-> FUNC DC
-> VOLT:OFFS 1
-> OUTP:LOAD INF
-> OUTP ON
//To reset the U2761A to default
power-on state, this command
can be ignored if this operation
is not required.
//Sets the output to DC.
//Sets the output DC offset voltage
to 1 VDC.
//Changes the output termination
to infinity.
//Turns on output.
U2761A User's Guide